26
Mar
Mar
Leaf springs w/3 to 6 in lift, Axes (dana 60 frontend or dana 44)
Answer:
Any spring shop can disassemble the existing leaf spring assemblies and add as many leaves as you want and install spacer blocks for additional height.
But beware - if you raise it more than 2 to 3″ above the factory designed ride height you’ll encounter serious issues with driveline alignment and you will damage universal joints very frequently.
So take a little advice and keep the “lift” limited if you intend to actually drive this car when it is all done.
Answer:
Good luck trying to find used factory springs, now you want a lift, I don't think even rancho offers them any more. You may have to have some custom made, look up national spring and give them a call you’ll have to give them dimensions and how many leafs in the spring pack and exactly what lift you want
This entry was posted
on Thursday, March 26th, 2009 at 7:23 am and is filed under Jeep.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or TrackBack URI from your own site.