12
Oct
Oct
Its a 93 V6. 2.5 I’ve 2.5 exhaust, cold air intake,striped out rear inteiror.Im maybe pushing out about 175HP. But thats not enough, im getting spanked by the CIVICS! The last thing I did was a ATX to manuel swap.What do I need to change and mod for turbo?
Answer:
With a 7 PSI boost, you should be near to 260 HP.
For this amount of boost you don't need a lot of fancy parts.
What you’ll need is a set of custom headers, and either one or two turbo chargers, the extent of a custom intake would only need to be a way balance the boost into one intake runner before the throttle body and after the MAF.
In your case give some thought to a supercharger.
If you want to go all out see the link.
Answer:
There’s much to be done for a turbo conversion. Turbo, different intake, possible different air flow sensor, installing an intercooler kit, new exhaust manifold, injectors, fuel managment, boost controller, boost gauge. ECU reflash possibly. Not to mention a person who knows how to tune correctly. Im sure Im forgetting stuff but if you just consider all that it might be better for you to buy an already turbo injected automobile. This way it at least gives you something to build off Book Mark it-> del.icio.us | Reddit | Slashdot | Digg | Facebook | Technorati | Google | StumbleUpon | Window Live | Tailrank | Furl | Netscape | Yahoo | BlinkList
This entry was posted
on Sunday, October 12th, 2008 at 6:26 am and is filed under Mazda.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or TrackBack URI from your own site.