Archive for the "Chrysler" Category

1
Feb

the fuses and bulbs seem to be fine. any help?
Answer: You need to replace the “flasher” relay. They cost about $10 and can be obtained from any auto parts store.
Answer: Go with the first poster. But to be honest I have an 04 as well and I think they are a bunch of lemons. […]

Read the rest of this entry »

1
Feb

for the hazard and signal lights.
Answer: The combo flasher plugs into the multifunction switch. If you remove the steering colmn shroud, you will see the yellow box.

Read the rest of this entry »

1
Feb

such as “alpha q” and “alpha kenny body”.
Does anyone know any?
Answer: Nadia, you're NASTY ! !
Answer: 4 q
Answer: gimme a match i think my gas tank is empty

Read the rest of this entry »

30
Mar

my mom needs to get engine oil for her automobile and she cant find the car's manual & she doesnt know what kind of engine oil she needs..
its a 1999 plymouth voyager (van)
Answer: The factory calls for 5W-30, 10W-30 is acceptable unless it is extremely cold. I've used Fram filters for over 30 years, for […]

Read the rest of this entry »

30
Mar

it is set to 500-600
Answer: should be around 700 rpm

Read the rest of this entry »

27
Mar

how much does it cost to fix a blown head gasket?
Answer: Engine size makes a diiference,look at around $1500.

Read the rest of this entry »

27
Mar

I see people referencing a C G racing throttle body but I can't find anything. I would like to see if the cost and gains would justify going to this on my prowler.
Answer: All details are on their home page

Read the rest of this entry »

26
Mar

All throttle body vehicles have a tendency to 'coke' up in the intake manifold due to the fact that gas no longer go through them. This sludge gets around the throttle plate and restricts air. The computer tries to compensate for it and causes two things to happen. Jerking while slowing down and surging at […]

Read the rest of this entry »

25
Mar

1996 Chrysler LHS 3.5 motor is it an interference or non interference motor
reason I ask I'm pretty sure my timing belt / chain? snapped on me
Answer: The 96 is a non-interference motor and uses a belt. They make a special tool to remove the crank sprocket so you can get the new belt on, but […]

Read the rest of this entry »

25
Mar

I mygrandmama car is a 2006 crysler pt cruiser and her abs brake system dashboard light is permanently on now. and she just had her brake fixed and rebalanced. So why is the light still on? Does this mean she has to get a new sensor again?
Answer: All details are on their home page

Read the rest of this entry »